A Grate Place to start;
- Domestic, Commercial
- Kit form ready to go
- Or create your own
- 24 hour delivery
Frequently Asked Questions
Once you have chosen the grate profiles (wedge wire, brick pattern or tile insert), you will need to add the corresponding sized base channel.
1500mm long by 158mm wide by 72mm deep Tile Insert Tray Only will need a 1500mm long by 158mm wide by 72mm deep Base Channel.
For a 3 metre project, you would need 2 quantities – an extended project would also require a joiner.
Then add the corresponding end caps and required outlet size.
If needed add the hole saw and silicone glue.
We are more than happy to cut your UPVC product to suit a mitre cut at no extra cost, this will, however, add 1 business day to dispatch times so please factor this in when ordering. Simply add a note when ordering. Don’t forget to add either a 45 or 90 Degree corner joiner for a corner project.
Yes, we do offer local pickup. We are located at 2/10 Doyle Avenue Unanderra. We just ask that you wait for your confirmation of pickup before you arrive. Expect a confirmation within 2 hours of ordering.
Yes, you can order your product anywhere you need however we are unable to replace your items if they disappear on an unmanned job site.
Absolutely! You can contact us via phone at (02) 4272 3264 or email firstname.lastname@example.org . We are more than happy to offer extensive product support and run you through what you will need for your product.
As suppliers we recommend a licensed plumber or tiler to install the product for you.